UK-based suppliers, applicators and trainers. Call us today to get a free sample : 01604 644604

Blogs Post

Posted on 11 Jan 2023

7 Common Mistakes With Laser Engraving.

Since your company specializes in laser cutting, you are aware of the significance of problem-solving. This blog article will talk about a few of the most typical laser engraving issues and offer solutions. 

To know where exactly you will find such a service, just do a google search for engraving services near me. This knowledge will enable you to make the most of your engraving tools, regardless of your level of experience with lasers. So continue reading to discover how to fix laser engraving issues like an expert. 

There will always be some learning curve while using new technologies. Not an exception is laser engraving. Even if you are experienced with conventional engraving techniques, utilizing a laser engraving service for the first time may present some challenges.

Common Mistakes with Laser Engraving:

No Light Emission

Not to worry! There are a few possible problems if your laser engraving won't switch on or doesn't emit light. The motor wire contacts may be wrong, or the power line is loose. If the machine still won't switch on, a burnt fuse or tripped fuse box can be the blame. Here are some steps you need to do when troubleshooting. Next, check the laser power cord or supply connected to an outlet. 

Distorted Alignment

What allows an engraving font to be misplaced and deformed? It can indicate a loosened laser head as a result of severe laser head pulley wear and tear. The screws can be loose. A mismatched engraving machine should be fixed by locating the issue and noting the degree of the misalignment.

It Depends On How Hot The Laser Is

You may do several things to cool down the laser if it becomes too hot. Start by trying to cut a different part of the material by moving the laser beam. By doing so, the heat will be better able to escape, and the fabric won't burn. If it doesn't work, you can use a conditioning gel or boost the coolant flow. Some people consult and examine the water circulation. If neither of these remedies works, you might have to install a cooled laser lens. On the contrary, there are several things you may do to enhance the heat if the laser is indeed not hot enough.

Technical Issue

You may take several steps to troubleshoot a laser engraving machine's computer settings if you're experiencing problems. Please make sure the program parameters are appropriate for the material you're going to engrave by checking them first.

Broken Elements

If you're having issues, you could take several actions to troubleshoot your default settings on laser engraving equipment. Check the software parameters to make sure they are suitable for the substance you intend to engrave. Just be sure to purchase the proper lens or reflector for your specific engraving unit, taking into account its size and kind.

Banding Troubles

Initially, there is the banding problem. This occurs when the laser ruins the engraving by leaving behind a string of lines. Usually, poor focus or cloudy optics are to blame. Quickly wash the lenses as well as adjust the direction till the lines are gone to resolve the issue.

Messy Engraving

The engraving's lack of depth represents one of the most frequent issues. This might occur as a result of the laser beam's low power or improperly adjusted focus. Try changing the strength or concentration until you achieve the desired results if you are having problems getting deep engraving.


The options for laser engraving are essentially unlimited. This adaptable technology may be applied to a variety of tasks, from anti-reflective coating to personalized presents. These are some pointers to get you started if you're new to laser engraving. Lastly, don't be scared to use your imagination! You can give your projects special finishing touches by laser engraving. The sky's the success limit if you have a little originality! For more detail on our services.